Zero SR/S

60-30 Body
Body
60
23. Install small screws (x7) securing the right
fairing arm inner and right fairing arm outer to
the tank collar. Tool: #2 Phillips screwdriver.
Torque: Hand tighten - Do not over-tighten.
24. Install large screws (x5) securing the left knee
grip to the tank collar. Tool: #2 Phillips
screwdriver. Torque: Hand tighten - Do not
over-tighten.
25. Install large screws (x5) securing the right
knee grip to the tank collar. Tool: #2 Phillips
screwdriver. Hand tighten - Do not
over-tighten.
26. Release the cable end from the tank lock
bracket.
27. Release the cable end from the tank collar
cable retainer.
28. Release the cable end from the tank lock latch
mechanism.