Zero SR/S User Manual

Electrical
Cellular Connectivity Module (CCM) 70-37
70
7. Roll the CCM rubber cap down and remove it.
8. Roll the CCM rubber harness cover upward to
reveal the harness connector.
9. Turn the CCM over and release the harness
connector by pushing the locking tab.
10. Remove CCM.
Installation
1. Installation is the reverse of the removal
procedure, but follow the proceeding steps to
complete the CCM installation.
2. Insert the CCM harness connector.
3. Roll the CCM rubber harness cover down over
the CCM as far as it will go.
Note: The satellite logo on the CCM is the side
that needs to be facing up when installed on
the motorcycle. Confirm that the satellite logo
and the “THIS SIDE UP” text on the rubber
harness cover are facing the same direction.
4. Push the CCM rubber end cap on the end of
the CCM as far as it will go.

Zero SR/S Specifications

General

Category	Motorcycle
Peak Power	110 hp (82 kW)
Continuous Power	54 hp (40 kW)
Torque	140 ft-lb (190 Nm)
Range (City)	161 miles (259 km)
Range (with Power Tank)	200 miles (322 km)
Top Speed (Max)	124 mph (200 km/h)
Top Speed (Sustained)	110 mph (177 km/h)
Front Tire	120/70 ZR17
Rear Tire	180/55 ZR17
Motor	Z-Force 75-10
Battery	ZF14.4 Lithium-ion
Range (Highway)	82 miles (132 km) at 70 mph
Seat Height	787 mm (30.9 in)
Wheelbase	1, 450 mm (57.1 in)
Front Suspension	Showa 41 mm
Rear Suspension	Showa 40mm piston, piggy-back reservoir shock
Front Brake	Dual J-Juan asymmetric piston calipers, 320 x 5 mm discs
Rear Brake	J-Juan single piston floating caliper with 240mm disc
ABS	Bosch Gen 9
Charging Time (Standard)	4.5 hours