15
PREVENTIVE DAILY SERVICE
C112 C113 G16
SUSPENSION EQUIPMENT
Check condition of suspension and
connection equipment including the
trailer.
AFTER WORK WITH FRONT-CARRIED
MACHINESI
After work with front-carried machines:
Check tightness of connections of the
external hydraulic circuit for control of the
front three-point suspension.
Clogging of radiators:
1. Tilt up the bonnet.
2. Release and slide out the A/C
condenser to the left side of the
tractor.
3. Clean the front walls of the engine
radiator (A/C condenser) using
compressed air (blow air in direction
from the engine).
4. Remove remaining dirt from the
space under the bonnet (to prevent its
re-sucking).
SHORT FUNCTIONAL TEST
After starting the engine check whether
the indicator of hydrostatic steering fault,
indicator of engine lubrication and
indicator of recharging are off.
Check function and tightness of
hydraulic steering circuits.
To Next Page
Loading...
Need help?
General
