Zetor Proxima 100 User Manual

56
DRIVING OPERATION
G207
C208
IMMEDIATELY AFTER STARTING
After starting set the engine
speed to 800 up to 1000 min
-1
and let the engine at idle running
for ca 2 minutes without load.
In that time check lubrication, charging
(indicator lights must be “off“) and other
functions assuring the correct engine
operation. Time of engine idle without
load must be kept especially in winter
season.
PREHEATING OF ENGINE
Continue with farther preheating the engine already while driving. Warming up
the engine by long idle run or fast increase of speed is dangerous for the
engine.
Do not exceed engine speed above 2 000 min
-1
until the coolant temperature
reaches 45 °C.

Zetor Proxima 100 Specifications

General

Engine Power	100 hp
Fuel Tank Capacity	150 L
Power (hp)	100 hp
Displacement (L)	4.156 L
Rated speed (rpm)	2200 rpm
Max. speed (km/h)	40 km/h
Hydraulic System	Open center
Engine Type	4-cylinder diesel