SWT
GIGABIT/FAST ETHERNET SWITCH TYPE SWT 82/137
USER GUIDE - M0SWTA1903Iv09 - V09 March 2019
The general configuration parameters for the ports are the following:
• #. Physical interface identifier.
• Security Type. It establishes if the filtering service by MAC address is active in the
indicated port (maclist option), or the 802.1x authorization is used (dot1x option),
or no filter is activated (none option).
• Max. Addresses. This sets the maximum number of MAC addresses permitted at
one time in the indicated port.
• On max. reached. This establishes the behaviour of the equipment in the event of
reaching the maximum number of MAC addresses permitted, as established in the
preceding parameter. The available options are replace or restrict.
FIGURE 45 Main Security menu configuration screen
5.15.1 802.1x
This submenu permits specifying the 802.1x users authentication through access to a
RADIUS server.
The general configuration parameters are the following:
• Enable. A simple CheckBox parameter to indicate if the RADIUS client, as well as
the 802.1x authentication, is active or not.
To Next Page
Loading...
