SWT
GIGABIT/FAST ETHERNET SWITCH TYPE SWT 87/137
USER GUIDE - M0SWTA1903Iv09 - V09 March 2019
After having selected the image, the update is executed by pressing Reflash. The process
usually takes about 5 minutes, during which time the results of the different steps are
displayed in the HTML browser window, but depending on the browser, it is possible that
only the result at the end of the process is shown.
The Only verify option allows users to check that the code saved is coincident with the
binary image selected without affecting the installed image.
5.19 CONFIGURATION FILE
The equipment configuration can be retrieved (Download) or uploaded (Upload) by means
of a text or XML file.
FIGURE 50 Options for uploading (Upload) or downloading (Download) the configuration file
To Next Page
Loading...
