4. Use to select the file type, and press .
Setting value Tracks recorded Explanation
None
‐
Nothing is recorded on the SD card.
Track1-8 (Poly WAV) A single (multitrack) file is created that
contains audio for multiple tracks.
Track1-8 (Mono/Stereo
WAV)
Selected tracks 1–8
A single mono file is created for each mono
track and a single stereo file is created for
each stereo track.
Track1-8 + L/R (Poly WAV) A single (multitrack) file is created that
contains audio for multiple tracks.
Track1-8 + L/R (Mono/
Stereo WAV)
Selected tracks 1–8 +
L/R track
A single mono file is created for each mono
track and a single stereo file is created for
each stereo track.
L/R (Stereo WAV)
L/R (Stereo MP3)
L/R tracks A stereo file is created based on the mix
created by the internal mixer.
NOTE:
• When recording with the “Mono/Stereo WAV” setting, the audio files are saved in a take folder that is
created. (→Folder and file structure)
• When recording to 2 SD cards simultaneously, files will be saved in take folders with the same name on
both cards. Folders will be created automatically if they do not already exist.
• If recording should stop on one SD card because, for example, it runs out of space, recording will
continue on the other SD card. At such times, do not remove the card that has stopped recording from
the slot. Doing so could damage the card or data.
120
To Next Page
Loading...
