Adjusting the input signal monitoring balance
You can adjust the volume of each input signal when monitoring.
1. Open the mixer on the Home Screen. (→Mixer Screen)
2. Use to adjust the faders.
NOTE:
• The MAIN OUT 1/2 and SUB OUT 1/2 faders do not affect the levels of the slate mic and slate tone.
(→Using the slate mic and slate tone)
• These volume settings only affect the monitoring signals. They have no effect on recorded data.
• Settings are saved separately for each take that is already recorded and can be changed during playback.
(→Mixing takes)
• Mix settings are not saved with the take when the recorded file format is MP3.
HINT:
• The fader setting range is muted, and –48.0 to +24.0 dB.
• You can turn to move the cursor, and also adjust the settings of the MAIN OUT 1/2 and SUB OUT
1/2 signals. (→Setting output levels)
44
To Next Page
Loading...
