Zoom F8n Pro - Setting the Power Supply Used by the FRC-8 (Power Source)

Setting the power supply used by the FRC-8 (Power
Source)
Set the DC power supply shutdown voltage, nominal voltage and type of batteries so that the remaining
power supply charge can be shown accurately.
On this menu page, you can check the voltage of each power supply and the remaining battery capacity.
1. Press .
This opens the Menu Screen.
2. Use to select “USB”, and press .
3. Use to select “FRC-8”, and press .
4. Use to select “Power Source”, and press .
Power settings for the FRC-8 are the same as for the F8n Pro. See “Setting the power supply used
(Power Source)”.
252