Zoom F8n Pro - Setting WAV File Bit Depth

Setting WAV file bit depth (WAV Bit Depth)
You can set the bit depth of WAV files.
1. Press .
This opens the Menu Screen.
2. Use to select “REC”, and press .
3. Use to select “WAV Bit Depth”, and press .
4. Use to select the bit depth, and press .
NOTE:
When selecting “32-bit Float”, “Exceeding maximum input level.” appears in the display if the input signal
exceeds the maximum input level (+4 dB (when the input source is set to “Mic”)/+24 dB (when the input
source is set to “Line”)). In this case, adjust the output level of the device connected to the input jack of the
F8n Pro.
125