Zoom F8n Pro - Setting the Keys Held (Key Hold Target)

Setting the keys held (Key Hold Target)
Use the hold function to prevent misoperation during recording. Press + to turn it on/off.
Follow these instructions to set which keys are disabled by the hold function.
1. Press .
This opens the Menu Screen.
2. Use to select “SYSTEM”, and press .
3. Use to select “Key Hold Target”, and press .
4. Use to select the keys held, and press .
HINT:
You can select “Track 1-8”, “PFL 1-8”, “Trim Knob 1–8”, “Slate Mic”, “Slate Tone”, “Encoder”, “MENU”, “HP
Volume”, “REW”, “STOP”, “FF”, “PLAY” and “REC”.
276