Zoom F8n Pro - Selecting Signals Sent to Sub Outputs

Selecting signals sent to the sub outputs (SUB OUT
Routing)
You send either prefader or postfader signals for each track to the sub outputs.
1. Press .
This opens the Menu Screen.
2. Use to select “OUTPUT”, and press .
3. Use to select “SUB OUT Routing”, and press .
4. Use to select the track for SUB OUT 1 or SUB OUT 2 routing, and press .
❶
Tracks routed to SUB OUT 1 or SUB OUT 2
Press to cycle through the options: “Prefader” → “Postfader” → “Off”.
• : Prefader selected
117