Zoom F8n Pro - Setting the Date and Time

Setting the date and time (first time starting up)
The first time the power is turned on after purchase, set the date and time when the Set Date/Time Screen
opens. The date and time are added to recording files.
1. Use to select the setting item and press .
2. Use to change the value and press .
3. Repeat steps 1–2 to set the date and time.
4. After finished all the setting, use to select “Enter” and press .
NOTE:
If power is not supplied by an AC adapter for a long time, date and time settings will be reset. If the date and
time setting screen appears during startup, set them again.
41