Zoom F8n Pro - Page 116

• : Postfader selected
• : Off
❷
Monitoring mid-side stereo signals
Input track stereo signals are converted to mid-side stereo signals for output.
When mid-side stereo monitoring is enabled, the prefader tracks will be routed automatically to
MAIN OUT 1/MAIN OUT 2, with the odd-numbered to the MAIN OUT 1 and the even-numbered to
the MAIN OUT 2. In this case, the routing cannot be changed manually.
❸
All Clear
Clear all settings.
❹
Prefader setting
Set tracks 1–8 to prefader.
❺
Postfader setting
Cycles options:
• Change tracks 1–8 to postfader (cancels others)
• Change L/R to postfader (cancels others)
• Change U1–U4 to postfader (cancel others)
NOTE:
• When “Audio Interface with Rec“ is set to “On”, USB tracks 1–4 can be assigned. (→Using SD card
recording and audio interface functions at the same time (Audio Interface with Rec) )
• Only postfader can be selected for L/R and USB1–4 tracks.
• You cannot select the 1–8, L/R and USB1–4 tracks at the same time. Selecting one will deselect any other.
5. Press .
116