Zoom F8n Pro - Page 159

4. On the UltraSync BLUE, select the F8n Pro as the connected device.

Timecode
UltraSync BLUE
When pairing completes, “Connected.” will appear on the F8n Pro display.
HINT:
• See the UltraSync BLUE manual for the procedures to select connected devices.
• Use the F8n Pro and the UltraSync BLUE as close together as possible to make communication more
reliable.
• Even if communication with the UltraSync BLUE is interrupted during recording, timecode data that is
counted on the F8n Pro can be added.
■ Disconnecting from the UltraSync BLUE
The UltraSync BLUE is disconnected from the F8n Pro and stop timecode recording. Pairing information will
be retained even when disconnected.
1. Press and hold on the Home Screen.
2. Use to select “Yes”, and press .
The UltraSync BLUE is disconnected and “Disconnected.” will appear on the display.
159