5. Use to select “Pair”, and press .
Searching for the connected device will begin and “Searching…” will appear on the display.
HINT:
• Searching can be canceled by pressing .
• You can restart searching by selecting “Pair” on the “Timecode” screen even if the searching is canceled.
6. On the different UltraSync BLUE, select the F8n Pro as the connected device.
When pairing completes, “Connected.” will appear on the F8n Pro display.
HINT:
• See the UltraSync BLUE manual for the procedures to select connected devices.
• Use the F8n Pro and the UltraSync BLUE as close together as possible to make communication more
reliable.
• Even if communication with the UltraSync BLUE is interrupted during recording, timecode data that is
counted on the F8n Pro can be added.
161
To Next Page
Loading...
