Other trouble
Computer does not recognize it even though it is connected to a USB port
• The operation mode must be set on the F8n Pro to allow the computer to recognize the F8n Pro.
(→Using as an audio interface (Audio Interface))
Battery operation time is short
Making the following settings could increase the battery operation time.
• Set the power supply used correctly. (→Setting the power supply used (Power Source))
• Turn unnecessary tracks off. (→Selecting inputs)
• Turn unnecessary outputs off. (→Disabling outputs (Output On/Off))
• Set the phantom power voltage to 24V. (→Setting the voltage)
• Disable phantom power during playback. (→Disabling phantom power during playback)
• Turn timecode off if not using it. (→Setting the mode)
• Reduce the LED brightness. (→Setting the LED brightness (LED Brightness))
• Reduce the display brightness. (→Making display settings (LCD))
• Set the display to dim when not used for some time. (→Making display settings (LCD))
• Reduce the sampling rate used to record files. (→Setting the sampling rate (Sample Rate))
• Due to their characteristics, using nickel metal hydride batteries (especially high-capacity ones) or lithium
batteries should enable longer use than alkaline batteries when power consumption is high.
304
To Next Page
Loading...
