Zoom F8n Pro - Page 35

Connecting mic capsules
A ZOOM mic capsule can be connected to the MIC IN connector on the back of the F8n Pro.
NOTE:
• The mic capsule input is assigned to tracks 1/2.
• When a mic capsule is connected, Inputs 1/2 cannot be used.
1. Remove the protective caps from the F8n Pro and the mic capsule or extension cable.

2. While pressing the side buttons on the mic capsule or extension cable, connect it to the main unit,
inserting it completely.

3. To disconnect the mic capsule or extension cable, pull it away from the main unit while simultaneously
pressing the buttons on its sides.
NOTE:
• Do not use too much force when disconnecting. Doing so could damage the mic capsule, extension cable
or main unit.
• Reattach the protective cap when a mic capsule is not connected.
35