Zoom F8n Pro - Page 59

5. Use to select “On/Off”, and press .
6. Use to select the setting, and press .
Setting Explanation
Off This disables the limiter.
On (Normal) This applies an ordinary limiter. The ratio is 20:1.
Before limiter
After limiter
Peak might remain
threshold
For the limiter settings, see “Setting the ordinary limiter (Normal)”.
On (Advanced) By detecting the maximum level in advance, this optimized limiter
prevents distortion even more than ordinary limiter operation. The
ratio is ∞:1, providing increased internal headroom.
Before limiter
After limiter
target level
Sudden peaks are suppressed
by detecting maximum levels
in advance
For setting the target output level for the signal, see “Setting the
target level”.
59