Zte ZXV10 W615 - Page 28

ZXV10 W615 User Manual
26 Confidential and Proprietary Information of ZTE CORPORATION
ii. Configure the parameters. Refer to the following table.
Parameter Description
Server Type Specifies the server type. The options are Master Auth
Server, Master Acct Server, Backup Auth Server, and
Backup Acct Server. The default is Master Auth Server.
Server IP Address Specifies the IP address of the authentication server, for
example, 192.168.1.1.
Server Port Specifies the port of the authentication server, for
example, 1812. The range is 0 to 65535.
Secret Specifies the WPA-EAP encryption key. The range is
1-64 characters.
Reauth Period The default is 3600 s.
Enable Preauth Enables or disables the pre-authentication function. The
function is disabled by default.
WEP Encryption Enables or disables WEP encryption. It is disabled by
default.
WEP Encryption Level Specifies the WEP key length. The options are 128bit
and 64bit. The default is 128 bit.
3. Click Submit.