ZyXEL Communications IES-22A - Page 251

Chapter 42 Commands
IES-708-22A User’s Guide
251
enable <portlist> Turns on the specified SHDSL
ports.
M/H
disable <portlist> Turns off the specified SHDSL
ports.
M/H
gbond set <name> <portlist> <sid> (STUC mode only) Create a stuc
mode bonding group.
H/H
gbond set <name> <portlist> (STUR mode only) Create a stur
mode bonding group.
H/H
gbond delete <name> Delete a bonding group. H/H
gbond show [<name>] Displays bonding group status. L/L
gbond port <portlist> Displays which bound group the
port belongs to
L/L
profile show [profile] Displays profile contents. L/L
profile set <profile> <min-rate>
<max-rate>
[annexa|annexb
2wire|4wire|mpair4
[lp_off | lp_on_cur <curr-
margin> | lp_on_wc
<worst-margin>]]
Creates a shdsl line profile. H/H
profile delete <profile> Removes an SHDSL profile. H/H
profile map <portlist> <profile> [pam
mode]
Assigns a specific profile to a
port(s).
H/H
name <portlist> <name> Sets the name of a port(s). M/L
tel <portlist> <tel> Records an SHDSL port(s)
subscriber’s telephone number.
M/L
loopback <portlist> <f5> <vpi>
<vci>
Performs an OAMF5 loopback
test.
H/H
vcprofile show [vcprofile] Shows a virtual channel profile’s
contents.
L/L
vcprofile set <vcprofile> <vc|llc>
<ubr|cbr> <pcr> <cdvt>
Creates a UBR or CBR virtual
channel profile (with
encapsulation).
H/H
vcprofile set <vcprofile> <vc|llc>
<vbr(rt-vbr)|nrt-vbr>
<pcr> <cdvt> <scr mcr>
<bt nrm>
Creates a VBR virtual channel
profile (with encapsulation).
H/H
vcprofile delete <vcprofile> Removes a virtual channel profile. H/H
pvc show [<portlist> [<vpi> <vci>]] Displays PVC settings. M/L
pvc set <portlist> <vpi> <vci>
<super |vid = 1..4094
<priority>> <DS
vcprofile[,US vcprofile]>
Creates or modifies a PVC
setting.
H/H
pvc delete <portlist> <vpi> <vci> Removes a PVC setting. H/H
ppvc show [<portlist> [<vpi> <vci>]] (STUC mode only) Display priority
PVC settings
M/L
Table 89 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P