ZyXEL Communications IES-22A - Page 254

Chapter 42 Commands
IES-708-22A User’s Guide
254
pmm set <portlist>
<normal|forced>
H/H
pbo show <portlist> L/L
pbo set <portlist>
<normal_epl|forced_epl|f
orced_no_epl> <value>
H/H
alarm
clear Clear current alarm M/L
cutoff Alarm cutoff M/~
xedit <alarm>|all
<cond>|<condcode>
<severity> <fac>
<target>[,<target>]
[clearable]
Edit system alarm table M/L
history clear <alarm>|all
<condition>|all
Clear history alarm M/~
history clear <severity> Clear history alarm M/~
history show [<severity>|all]
[<alarm>|all]
[<condition>|all]
[<sdate>|all]
[<edate>|all] [for|rev]
[detail]
Display history alarm L/~
show [<severity>|all]
[<alarm>|all]
[<condition>|all]
[<sdate>|all]
[<edate>|all] [for|rev]
[detail]
Display current alarm L/L
port show Display xDSL port threshold of
severity which will issue an alarm
L/L
port set <all|<portlist>>
<severity>
Set xDSL port threshold of
severity which will issue an alarm
M/L
tablelist [<alarm>|all]
[<severity>|all] [<fac>|all]
[<target>[,<target>]]
[<condition>|all]
Display system alarm table L/L
switch
igmpsnoop show Displays the IGMP snooping
setting.
M/L
igmpsnoop enable <proxy|snooping> (STUC mode only) Sets IGMP
snooping mode.
H/H
igmpsnoop enable (STUR mode only) Enables IGMP
snooping.
H/H
igmpsnoop disable Turns off IGMP proxy/snooping. H/H
igmpsnoop bandwidth
default
<bandwidth> (STUC mode only) Set default
bandwidth for multicast IP
channels
M/H
Table 89 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P