ZyXEL Communications IES-22A - Page 253

Chapter 42 Commands
IES-708-22A User’s Guide
253
alarmprofile set <profile> [atten <atten>]
[snrmgn <snrmgn>] [es
<es>] [ses <ses>] [crc
<crc>] [losws <losws>]
[uas <uas>]
Configures an alarm profile. H/H
alarmprofile delete <profile> Removes an alarm profile. H/H
alarmprofile map <portlist> <profile>
<span|stuc|stur|*>
Maps specified SHDSL ports to an
alarm profile.
H/H
alarmprofile showmap [port number] Displays alarm profile to SHDSL
port mapping.
L/L
alarmprofile showport <port number> Displays which alarm profile
parameters are mapped to an
SHDSL port.
L/~
dsbcast enable <portlist> <vlanlist> (STUC mode only) Enable
downstream broadcast on xDSL
port
M/H
dsbcast disable <portlist> <vlanlist> (STUC mode only) Disable
downstream broadcast on xDSL
port
M/H
dsbcast show <portlist> (STUC mode only) Show
downstream broadcast on xDSL
port
L/L
reset <portlist> Reset xDSL port H/H
paepvc delete <portlist> <vpi> <vci> (STUC mode only) Delete a
PPPoAoE PVC
M/H
paepvc set <portlist> <vpi> <vci>
<DS vcprofile[,US
vcprofile]> <pvid>
<priority> [acname
<string32>] [srvcname
<string32>] [hellotime
<time>]
(STUC mode only) Create/modify
a PPPoAoE PVC
<acname>: access concentrator
name
<srvcname>: service name,
<time>: 0~600 in unit of second
Default: acname=“”, srvcname=””,
<time>=600
M/H
paepvc show [<portlist> [<vpi> <vci>]] (STUC mode only) Display
PPPoAoE PVC setting by ‘port’
L/L
paepvc session <portlist> [<vpi> <vci>] (STUC mode only) Display
PPPoAoE PVC session status
L/L
paepvc counter <portlist> [<vpi> <vci>] (STUC mode only) Display
PPPoAoE PVC counter
L/L
tlspvc delete <portlist> <vpi> <vci> (STUC mode only) Delete a TLS
PVC
M/H
tlspvc set <portlist> <vpi> <vci>
<DS vcprofile[,US
vcprofile]> <pvid>
<priority>
(STUC mode only) Create/modify
a TLS PVC
<profile>:
<vid>: s-tag VLAN id
<priority>: priority for s-tag
M/H
tlspvc show [<portlist> [<vpi> <vci>]] (STUC mode only) Display TLS
PVC setting by ‘port’
L/L
pmms show [portlist] L/L
Table 89 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P