ZyXEL Communications IES-22A - Page 261

Chapter 42 Commands
IES-708-22A User’s Guide
261
dscp enable <portlist> (STUC mode only) Enable DSL/
ENET ports to use DSCP
mapping
M/H
dscp disable <portlist> (STUC mode only) Disable DSL/
ENET ports to use DSCP
mapping
M/H
dscp map show (STUC mode only) Displaying the
DSCP code to 802.1p mapping
table
L/L
dscp map set <srccp> <mappri>
<srccp>: source code
point, 0~63, example:
1,3~5,10~15
<mappri>: mapping
priority, 0~7
(STUC mode only) Setting the
DSCP code to 802.1p mapping
table
M/H
acl profile delete <profile> (STUC mode only) delete an acl
profile
M/H
Table 89 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P