ZyXEL Communications IES-22A - Page 262

Chapter 42 Commands
IES-708-22A User’s Guide
262
acl profile set <profile> <rule> <action> (STUC mode only) Create/modify
a acl profile
<rule>: <l2>|<l3_protocol>|<mfc>
<l2>: Layer-2 match fields (listed
in priority sequence match)
etype <etype> vlan <vid>
etype <etype> smac <mac>
etype <etype> dmac <mac>
vlan <vid> smac <mac>
vlan <vid> dmac <mac>
smac <mac> dmac <mac>
vlan <vid> priority <priority>
etype <etype>
vlan <vid>
smac <mac>
dmac <mac>
priority <priority>
protocol <protocol>
<priority>: 0~7
<etype>: 0~65535
<protocol>:
tcp|udp|ospf|igmp|ip|gre|icmp|<pty
pe>
<ptype>: 0~65535
Note: multiple-field rules (position
independent):
MFC rules:
{srcip <ip>/<mask>{| dstip <ip>/
<mask>{| tos <tos>{| srcport
<port>{| dstport <port>}}}}}
<mask>: 0~32
<tos>:0~255
<port>:0~65535
<action>: rate <rate>|rvlan
<rvlan>|rpri <rpri>|deny
<rate>: 1~65535 in unit of kbps
<rvlan>: replaced vlan 1~4094
<rpri>: replaced priority 0~7
M/H
acl profile show [<profile>] (STUC mode only) Display an acl
profile
L/L
acl profile showmap <profile> (STUC mode only) Display acl
profile reference
L/L
acl delete <portlist> <vpi> <vci>
<profile>
(STUC mode only) Remove an acl
profile from PVC
<profile>: string32
up to 8 profiles if only one PVC
has profiles
M/H
Table 89 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P