ZyXEL Communications IES-22A - Page 263

Chapter 42 Commands
IES-708-22A User’s Guide
263
acl set <portlist> <vpi> <vci>
<profile>
(STUC mode only) Apply an acl
profile to a PVC
Max. 8 profiles per port
M/H
acl show [portlist] [<vpi> <vci>] (STUC mode only) Show acl
profile setting for a PVC
L/L
dhcpsnoop disable <portlist> (STUC mode only) Disable ip
spoofing for a port
M/H
dhcpsnoop enable <portlist> (STUC mode only) Enable ip
spoofing for a port
M/H
dhcpsnoop flush <portlist> (STUC mode only) Flush DHCP
snooping table for a port
M/H
dhcpsnoop show [<portlist>] (STUC mode only) Display DHCP
snooping result on a port
L/L
ip
show Displays the management IP
address settings.
M/L
arp show Displays the device’s IP Address
Resolution Protocol(ARP) table.
M/L
arp flush Clears the device’s IP Address
Resolution Protocol(ARP) table.
H/H
set <ip>[/netmask] Sets the management IP address
and subnet mask.
H/H
gateway <gateway ip> Sets the IP address of the
device’s default gateway.
H/H
route show Displays the routing table. M/L
route set <dst ip>[/netmask]
<gateway ip> [metric]
<name>
Adds a routing table entry. H/H
route set default <gateway ip>
<metric>
Sets the device’s default route. H/H
route delete <dst ip>[/netmask] Removes a routing table entry. H/H
route flush Clears the routing table. H/~
ping <ip> [count] Pings a remote host. M/L
statistics
monitor Displays hardware monitor status. M/L
shdsl show [portlist] Displays SHDSL port connection
status.
M/L
shdsl gbond [name] Displays bonding group link
status.
L/L
shdsl lineinfo <portlist> Displays the info of the specified
SHDSL ports.
M/L
shdsl lineperf <portlist> Displays the performance
statistics of the specified SHDSL
port.
M/L
shdsl linerate <portlist> Displays the line rate. M/L
Table 89 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P