ZyXEL Communications IES4005M - Page 102

Chapter 11 Management
IES4005M User’s Guide
102
This example displays how to set the authorization method to “tacacs+ then local” for privilege 12
and then displays the settings.
This example displays how to set:
1 Accounting method to “radius” for recording system-type events.
2 Accounting method to “tacacs+” for recording command-type events with privilege 12.
3 Update interval to 3 minutes.
Finally, it displays the settings.
sysname# configure
sysname(config)# aaa authorization privilege 12 3
sysname(config)# exit
sysname# show aaa authorization
Privilege Mode
--------- ------------------
1 local
2 local
3 local
4 local
5 local
6 local
7 local
8 local
9 local
10 local
11 local
12 tacacs+ then local
13 local
14 local
sysname# config
sysname(config)# aaa accounting system radius
sysname(config)# aaa accounting command privilege 12 tacacs+
sysname(config)# aaa accounting update period 3
sysname(config)# exit
sysname# show aaa accounting
accounting update timeout: 3 minutes
accounting system:
method
-------
radius
accounting exec:
method mode
------- ----------
radius start-stop
accounting commands:
privilege
---------
12