ZyXEL Communications IES4005M - ATM VC Commands Summary

Chapter 14 ADSL
IES4005M User’s Guide
126
multiplexing may be dominant in environments where dynamic creation of large numbers of ATM
VCs is fast and economical.
14.1 ATM VC Commands Summary
This table describes the commands.
Table 87 ATM VC Commands Summary
COMMAND DESCRIPTION M P
show interface dsl <slot/portlist>
atm-vc
Displays the ATM VC configuration on the specified DSL
ports.
E13
interface dsl <slot/portlist>
Enters the sub-command mode for configuring the specified
DSL ports.
C13
exit
Leaves the DSL port configuration. C 13
atm-vc <vpi/vci> llc|vc priority
<priority> [mvlan]
Adds or configures the specified ATM VC on the DSL ports.
llc: LLC encapsulation
vc: VC-MUX encapsulation
mvlan: Include this to have the specified ATM VC join
MVLAN.
C13
no atm-vc <vpi>/<vci>
Removes the specified ATM VC from the DSL ports. C 13