ZyXEL Communications IES4005M - CONSOLE1 Port Pin Assignment

Chapter 3 Management Cards
IES4005M User’s Guide
27
5 Press the transceiver firmly until it clicks into place.
Figure 9 Installing a Transceiver
3.2.6.4 Transceiver Removal
Use the following steps to remove a mini GBIC transceiver (SFP module) from the slot.
1 Remove the fiber-optic cables from the transceiver.
2 Unlock the transceiver’s latch (latch styles vary).
3 Pull the transceiver out of the slot.
4 Put the transceiver’s dust cover on the transceiver.
Figure 10 Removing a Transceiver
3.2.7 CONSOLE1 Port Pin Assignment
Use this mini RJ-11 port for local management of the IES.
Figure 11 CONSOLE1 Mini RJ-11 Female Connector
PIN1
PIN4