Chapter 7 Cables
IES4005M User’s Guide
55
7.7.1 Application
Telco 64 cables connect the line card Telco 64 connectors to MDFs (Main Distribution Frame), patch
panels and distribution boxes.
Telco 64 cables are made up of 32 twisted-pair copper wires. The connections are as follows:
• One end of the cable has a Champ 64 connector that connects to the Telco 64 Champ connector
on the front of a line card.
• The other end of the cable can be bare wires for connecting directly to an MDF. Alternatively,
attach RJ-11 connectors and connect directly to DSL modems or telephones.
7.7.2 Appearance
The following figures show what the Telco 64 subscriber cable looks like.
Figure 29 Telco 64 Subscriber Cable with Telco 64 Connectors
Figure 30 Telco 64 Subscriber Cable with Telco 64 Connector and RJ-11 Connectors
7.7.3 Pin Assignments
See Section 4.2.3 on page 30, Section 4.3.3 on page 33, and Section 4.4.3 on page 35 for the pin
layout of the Telco 64 subscriber cables.
To Next Page
Loading...
