Chapter 7 Cables
IES4005M User’s Guide
50
7.4 Local Management Cable
The local management cable is used for debugging or local maintenance.
7.4.1 Application
The connections are as follows:
• The mini RJ-11 connector connects to the MSC1002G’s CONSOLE1 port.
• The DB-9 socket connects to a computer.
7.4.2 Appearance
The following figure shows a local management cable.
Figure 25 Mini RJ-11 DB-9 Cable
7.4.3 Pin Assignments
The following diagram and chart show the pin assignments of the cable.
Connectors cable terminal, gauge 4~4.5 mm recommended
Wire gauge 18 AWG, go up 1 gauge for a distance of more than 10 feet
Cross-sectional area of the conductor 0.8231 mm2
Table 34 Frame Ground Cable Specifications (continued)
ITEM DESCRIPTION
To Next Page
Loading...
