IES4005M User’s Guide 47
CHAPTER 7
Cables
This chapter describes the appearance, specifications, and pin assignment of the cables you use
with the IES.
7.1 AC Power Cord
The AC power cord transmits AC power to the IES.
7.1.1 Application
An AC power cord with a PHS-301RL connector supplies the operating voltage for the IES chassis.
The connections are as follows:
• The end of the power cord with the PHS-301RL connector connects to the AC power input
connector of the IES4005M-AC.
• The other end of the power cord connects to the AC power outlet.
7.1.2 Appearance
The following figure shows an AC power cord.
Figure 23 AC Power Cord
The following figure shows the PHS-301RL connector’s measurements in millimeters.
To Next Page
Loading...
