EasyManua.ls Logo

ZyXEL Communications IES4005M - Command Examples

ZyXEL Communications IES4005M
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 16 Multicast
IES4005M User’s Guide
137
16.1.1 Command Examples
Note: Before you can use an interface, you have to activate (provision) the corresponding
slot. See Section 12.1.1 on page 107 for how to activate a slot.
This example shows how to enable IGMP snooping on the IES with the following settings:
•IGMP version 3
igmp-mld max-group <max-
group-cnt>
Configures the maximum group counts on the specified DSL ports.
max-group-cnt: 1-16
C13
igmp-mld group-privilege
Enables group privilege checking on the specified DSL ports. C 13
no igmp-mld group-privilege
Disables group privilege checking on the specified DSL ports. C 13
igmp-mld cac bandwidth
<bandwidth>
Enables multicast bandwidth CAC control and configures the
maximum multicast bandwidth.
bandwidth: 0-100 in Mbps
C13
no igmp-mld cac
Disables multicast bandwidth CAC control. C 13
igmp-mld group-privilege-
profile <group-privilege-
profile>
Applies the group privilege profile to the specified DSL ports.
group-privilege-profile: up to 31 printable characters
C13
no igmp-mld group-privilege-
profile <group-privilege-
profile>
Removes the group privilege profile from the specified DSL ports. C 13
show interface dsl <slot/
portlist> igmp-mld
Displays IGMP/MLD settings on the specified DSL ports. E 13
show igmp-mld group
Displays all joined multicast groups. E 13
show igmp-mld statistics
Displays IGMP/MLD packet statistics. E 13
clear igmp-mld statistics
Clears IGMP/MLD packet statistics. E 13
show interface dsl <slot/
portlist> igmp-mld group
Displays joined multicast groups on the specified DSL ports. E 13
clear interface dsl <slot/
portlist> igmp-mld statistics
Clears IGMP/MLD packet statistics on the specified DSL ports. E 13
show interface dsl <slot/
portlist> igmp-mld statistics
Displays IGMP/MLD packet statistics on the specified DSL ports. E 13
show interface dsl <slot/
portlist> igmp-mld log
Displays the IGMP/MLD program log for the specified DSL ports. E 13
clear interface dsl <slot/
portlist> igmp-mld log
Clears the IGMP/MLD program log for the specified DSL ports. E 13
acl multicast unsolicited
Forwards unknown multicast packets. C 13
acl multicast upstream inactive
Drops multicast packets from the upstream direction. C 13
no acl multicast unsolicited
Drops unknown multicast packets. C 13
no acl multicast upstream
inactive
Forwards multicast packets from the upstream direction. C 13
show acl multicast
Displays ACL settings for multicast packets. E 13
Table 91 IGMP/MLD Commands Summary (continued)
COMMAND DESCRIPTION M P

Table of Contents

Related product manuals