IES4005M User’s Guide 17
CHAPTER 2
IES Chassis
2.1 Appearance
The IES supports DC or AC power supply. The following figure shows the IES chassis with cards, the
MSC1002G/MSC1401G management card, and the IES4005M-DC installed. (If you need
information on the IES with AC power supply, refer to Chapter 4 on page 36.)
Figure 3 IES Front Panel with MSC1401G and IES4005M-DC
Figure 4 IES Front Panel with MSC1002G and IES4005M-DC
2.2 Deployment
Use mounting brackets to install the IES chassis in a 19-inch rack.
2.3 Bonding the IES
Caution!
All installation methods must be in accordance with national and local
regulations and practices.
Note: The IES is protected for overcurrent (short circuit) and overvoltage conditions.
To Next Page
Loading...
