ZyXEL Communications IES4005M - Page 104

Chapter 11 Management
IES4005M User’s Guide
104
15min-collision-threshold
<threshold>
Configures the number of frames for which transmission failed due to
excessive collisions allowed to receive/transmit in any 15-minute
period. Excessive collision is defined as the number of maximum
collisions before the retransmission count is reset.
C13
15min-64octets-threshold
<threshold>
Configures the number of frames 64 octets or less in length allowed to
receive/transmit in any 15-minute period.
C13
15min-127octets-threshold
<threshold>
Configures the number of frames 65 to 127 octets in length allowed to
receive/transmit in any 15-minute period.
C13
15min-255octets-threshold
<threshold>
Configures the number of frames 128 to 255 octets in length allowed to
receive/transmit in any 15-minute period.
C13
15min-511octets-threshold
<threshold>
Configures the number of frames 256 to 511 octets in length allowed to
receive/transmit in any 15-minute period.
C13
15min-1023octets-threshold
<threshold>
Configures the number of frames 512 to 1023 octets in length allowed
to receive/transmit in any 15-minute period.
C13
15min-1518octets-threshold
<threshold>
Configures the number of frames 1024 to 1518 octets in length allowed
to receive/transmit in any 15-minute period.
C13
15min-1522octets-threshold
<threshold>
Configures the number of frames 1519 to 1522 octets in length allowed
to receive/transmit in any 15-minute period.
C13
interface ge-nni <portlist> Enters the sub-command mode for configuring the specified GE ports. C 13
alarm-profile <alarm-
profile>
Applies the specified alarm profile to the port(s). C 13
clear interface ge-nni <portlist>
performance
Clears current, historical 15-minutes and historical 1-day Ethernet line
status on the specified GE ports.
E13
show interface ge-nni <portlist>
performance <current|15-min|1-
day>
Displays current, historical 15-minutes and historical 1-day Ethernet
line status on the specified GE ports.
E13
no voip alarm-profile <alarm-
profile>
Deletes the specified VoIP alarm profile. C 13
show voip alarm-profile [alarm-
profile]
Displays all or the specified VoIP alarm profile. E 13
voip alarm-profile <alarm-
profile>
Enters the sub-command mode for configuring the specified VoIP alarm
profile.
C13
exit Leaves the sub-command mode. C 13
15min-rtpelapse-threshold
<threshold>
Configures the accumulated time of RTP sessions allowed in any 15-
minute period. In other words, this is the amount of audio transmission
time allowed within 15 minutes.
C13
15min-rtptxbytes-threshold
<threshold>
Configures the accumulated number of bytes of RTP packets that can
be transmitted in any 15-minute period.
C13
15min-rtprxbytes-threshold
<threshold>
Configures the accumulated number of bytes of RTP packets that can
be received in any 15-minute period.
C13
15min-rtptxpkts-threshold
<threshold>
Configures the number of RTP packets that can be transmitted in any
15-minute period.
C13
15min-rtprxpkts-threshold
<threshold>
Configures the number of RTP packets that can be received in any 15-
minute period.
C13
15min-rtptxlostpkts-
threshold <threshold>
Configures the number of RTP packets that can be lost during
transmission in any 15-minute period.
C13
15min-rtprxlostpkts-
threshold <threshold>
Configures the number of RTP packets that can be failed to be received
by the IES in any 15-minute period.
C13
interface voip <slot/portlist> Configures specified VoIP UNI ports. C 13
Table 71 performance management commands summary (continued)
Command Description M P