ZyXEL Communications IES4005M - Page 108

Chapter 12 Line Card Management
IES4005M User’s Guide
108
3 Display the line card status again. Note that the line card’s state will go to “Init” and then “Active”.
ras# show lcman
f/w version: V3.60(UHM.0)b4
id state card type provision type uptime heat vol mon
-- -------- ----------- -------------- ------------- ------------
1 Active MSC1002G - 30:53 - - -
2 Idle ALC1132G-51 - - - -
3 - - - - -
4 Idle VOP1164G-61 - - - -
5 - -
ras# config
ras(config)# lcman slot 2 provision-type alc
ras(config)# exit
ras# show lcman
f/w version: V3.60(UHM.0)b4
id state card type provision type uptime heat vol mon
-- -------- ----------- -------------- ------------- ------------
0 Active MSC1002G - 37:02 - - -
1 Init ALC1132G-51 ALC1132G-51 - - -
2 - - - - -
3 Idle VOP1164G-61 - - - -
4 - - - - -
ras#