ZyXEL Communications IES4005M - Page 115

Chapter 13 Switch Features
IES4005M User’s Guide
115
interface dsl <slot/portlist>
Configures the specified DSL ports. C 13
fdb max-count <max-count>
Configures the maximum number of forwarding database MAC
entries for the specified ports.
C13
fdb uni-vlan-max-count <max-
count> uni-vlan <uni-vlan>
Configures the maximum number of forwarding database MAC
entries for the specified UNI VLAN on the specified ports.
mac-count: 1 ~ 32
uni-vlan: 1 ~ 4093
C13
no fdb uni-vlan-max-count
<uni-vlan>
Removes the maximum number of forwarding database MAC
entries limitation for the specified UNI VLAN on the specified
ports.
C13
fdb mac <mac> [vlan <vlan>]
Configures a static MAC entry on the specified ports. You can also
specify the VLAN it must use.
mac: unicast MAC address
vlan: 1 ~ 4093
VLAN mode | <vlan>
----------------------------------
Trunk uni-vlan | uni-vid
Trunk uni-untag | svlan
Trunk etype(S) | svlan
Trunk etype(S+C)| cvlan
Translation | uni-vid
Transparent | not supported
TLS | not supported
C13
no fdb mac <mac> [vlan
<vlan>]
Removes a static MAC entry from the specified ports.
mac: unicast MAC address
vlan: 1 ~ 4093
VLAN mode | <vlan>
----------------------------------
Trunk uni-vlan | uni-vid
Trunk uni-untag | svlan
Trunk etype(S) | svlan
Trunk etype(S+C)| cvlan
Translation | uni-vid
Transparent | not supported
TLS | not supported
C13
fdb static-mac-only
Allows only static MAC addresses. C 13
no fdb static-mac-only
Allows both static and dynamic MAC addresses. C 13
show interface dsl <slot/
portlist> fdb
Displays the forwarding database settings and maximum MAC
entry counts for the specified DSL ports.
E13
Table 79 Forwarding Database Commands Summary (continued)
COMMAND DESCRIPTION M P