ZyXEL Communications IES4005M - Page 135

Chapter 16 Multicast
IES4005M User’s Guide
135
no igmp-mld proxy
Disables IGMP/MLD proxy. C 13
igmp-mld proxy-reporting
Enables IGMP/MLD proxy reporting. IGMP/MLD transparent,
snooping, proxy, and proxy-reporting can not enabled at the same
time.
C13
no igmp-mld proxy-reporting
Disables IGMP/MLD proxy reporting. C 13
igmp-mld version
igmpv2|igmpv3|mldv1|mldv2|igmpv2
+mldv1|igmpv2+mldv2|igmpv3+mldv1
|igmpv3+mldv2
Sets the IGMP/MLD protocol version.
igmpv2 IGMP version 2
igmpv3 IGMP version 3
mldv1 MLD version 1
mldv2 MLD version 2
C13
igmp-mld leave-mode fast-
leave|last-member-query
Sets the IGMP/MLD leave message handling mode.
fast-leave: leaves the joined group immediately
last-member-query: sends a specific Query to check if any
hosts are still members
C13
igmp-mld last-member-query timer
query-interval <interval>
robustness <robustness>
Configures last member query timers.
interval: 100-1000 in ms, in step of 100
robustness: 1-5
C13
igmp-mld general-query timer
query-interval <interval>
robustness <robustness> max-
response-time <max-response-
time>
Configures general query timers.
interval: 10-300 in seconds
robustness: 1-5
max-response-time: 1-10 in seconds
C13
igmp-mld pbit <pbit>
Configures priority bit in proxy mode. C 13
show igmp-mld
Displays IGMP/MLD settings. E 13
igmp-mld group-privilege-profile
<profile-name> index <index>
Configures a group privilege entry for the specified group privilege
profile.
index: the entry index 1-16
C13
group-range <start-ip> <end-
ip>
Configures the group range.
start-ip: 224.0.0.0-239.255.255.255 for IPv4 or ff00:: ~
ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff for IPv6
end-ip: 224.0.0.0-239.255.255.255 for IPv4 or ff00:: ~
ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff for IPv6
C13
privilege permit
Enables permit privilege for the groups. C 13
privilege forbid
Enables forbid privilege for the groups. C 13
privilege preview <length>
<interval> <count> <reset>
Enables preview privilege for the group and configures the
preview parameters.
length: 10-300 in seconds
interval: 10-300 in seconds
count: 1-10
reset: 30-86400 in seconds
C13
Table 91 IGMP/MLD Commands Summary (continued)
COMMAND DESCRIPTION M P