Chapter 21 PPPoE Intermediate Agent
IES4005M User’s Guide
154
This command tests the PPPoE session handshake between port 1 of the line card in slot 2 and the
uplink PPPoE server. The result shows the IES failed to receive a PADO (PPPoE Active Discovery
Offer) from the PPPoE. In this case you would check the connection between the IES and the PPPoE
server.
ras# pppoe test 2/1 uni-untag
slot: 2 port: 1 start to PPPoE test
ras# show interface dsl 2/1 pppoe test
slot port status
---- ------ -------------------------------------------------------------------
2 1 receive PADO fail
ras#
To Next Page
Loading...
