ZyXEL Communications IES4005M - Page 199

Chapter 26 VoIP
IES4005M User’s Guide
199
voip ip address dhcp
release|renew
Performs DHCP operations on the VoIP interface.
release: release the dynamic IP address
renew: renew the dynamic IP address
C13
voip ip dns <dns-ip>
Configures the DNS server address that the VoIP interface uses.
dns-ip: 0.0.0.0 ~ 223.255.255.255
C13
voip ip default-gateway
<gateway-ip>
Configures the default gateway of the VoIP interface
gateway-ip: 0.0.0.0-223.255.255.255
C13
show voip ip address
Displays VoIP interface IP settings E 13
voip rtp ip address <ip-
address>/<mask> vlan <vid>
Configures the VoIP RTP interface IP address, subnet mask, and VLAN
ID. Disables the DHCP client function on the interface if it is enabled.
ip-address: 0.0.0.1 ~ 223.255.255.255
mask: 1 ~ 30
C13
voip rtp ip address dhcp vlan
<vid>
Configures the VoIP RTP interface to act as a DHCP client. C 13
voip rtp ip address dhcp
release|renew
Performs the specified DHCP operation on the VoIP RTP interface.
release: release dynamic IP address
renew: renew dynamic IP address
C13
voip rtp ip default-gateway
<gateway-ip>
Configures the default gateway of the VoIP RTP interface.
gateway-ip: 0.0.0.1 ~ 223.255.255.255
C13
no voip rtp
Removes all VoIP RTP configuration. C 13
show voip rtp ip address
Displays the VoIP RTP interface’s IP address settings. E 13
show voip rtp ip default-
gateway
Displays the default gateway of the VoIP RTP interface. E 13
show voip rtp ip dhcp
Displays the DHCP setting on the VoIP RTP interface. E 13
show interface voip <slot/
portlist>
Displays the configuration on the specified VoIP ports E 13
interface voip <slot/
portlist>
Enters the sub-command mode for configuring the specified VoIP ports. C 13
exit
Leaves the VoIP port configuration sub-command mode. C 13
dsp-profile <profile-
name>
Configures a VoIP DSP profile. Default: DEFVAL C 13
vbd-dsp-profile <profile-
name>
Configures a VoIP DSP profile for voice band data service. C 13
no vbd-dsp-profile
Removes reference to a VoIP DSP profile for voice band data service.
The voice band data service will refer to the VoIP DSP profile used for
voice service.
C13
clear call-statistics
Clears call statistics. C 13
active
Enables a VoIP port. C 13
no active
Disables a VoIP port. C 13
Table 135 VoIP Commands Summary (continued)
COMMAND DESCRIPTION M P