ZyXEL Communications IES4005M - Page 90

Chapter 11 Management
IES4005M User’s Guide
90
erase running-config
interface ge-nni <portlist>
[<attribute> [<...>]]
Resets the specified GE NNI ports to the factory default settings on a
per-port basis and optionally on a per-feature configuration basis. You
can specify a single port <1>, all ports <*> or a list of ports <1,2>.
You can also include a range of ports <1-2>.
E13
erase running-config
interface voip <slot/
portlist> [<attribute>
[<...>]]
Resets the specified VoIP ports to the factory default settings on a per-
port basis and optionally on a per-feature configuration basis.
E13
show running-config [page]
Displays the current configuration file. This file contains the commands
that change the IES's configuration from the default settings to the
current configuration. Optionally, displays current operating
configuration page by page.
E13
show running-config interface
dsl <slot/portlist>
[<attribute> [<...>]]
Displays the current DSL configuration on a port-by-port basis. E 13
show running-config interface
voip <slot/portlist>
[<attribute> [<...>]]
Displays the current VoIP configuration on a port-by-port basis. E 13
show running-config interface
ge-nni <portlist>
[<attribute> [<...>]]
Displays the current GE NNI configuration on a port-by-port basis. You
can specify a single port <1>, all ports <*> or a list of ports <1,2>.
You can also include a range of ports <1-2>.
E13
Table 62 Running Configuration Commands Summary (continued)
COMMAND DESCRIPTION M P