Chapter 11 Management
IES4005M User’s Guide
93
•IANAifType-MIB.mib
• INET-ADDRESS-MIB.mib
•Q-BRIDGE-MIB.mib
• RFC1155-SMI.mib
• RFC-1212.mib
• RFC1213-MIB.mib
• RFC-1215.mib
• RFC-1271.MIB
• RMON-MIB.mib
• SNMP-FRAMEWORK-MIB.mib
•SNMPv2-SMI.mib
•SNMPv2-MIB.mib
•SNMPv2-SMI.mib
•SNMPv2-TC.mib
• VDSL2_draft06.mib
•VDSL2-LINE-MIB.mib
• VDSL2-LINE-TC-MIB.mib
• IEEE8021-PAE-MIB.mib (8021X)
The following table describes commonly used parameter notation for these commands.
This table describes the commands.
Table 64 SNMP Server Command Parameters
NOTATION DESCRIPTION
property
1-31 English printable characters: spaces are not allowed.
Table 65 SNMP Server Commands Summary
COMMAND DESCRIPTION M P
show snmp-server
Displays SNMP settings. E 13
snmp-server get-community
<property>
Sets the get community. Only for SNMPv2c or lower. C 13
snmp-server set-community
<property>
Sets the set community. Only for SNMPv2c or lower. C 13
snmp-server trap-community
<property>
Sets the trap community. Only for SNMPv2c or lower. C 13
To Next Page
Loading...
