Chapter 11 Management
IES4005M User’s Guide
99
no aaa server accounting tacacs+
mode
Resets the accounting server’s index-priority or round-robin mode to
the default.
C13
no aaa server accounting tacacs+
timeout
Resets the timeout value to the default. C 13
show aaa server accounting tacacs+ Displays all TACACS+ accounting server settings. E 3
aaa server authorization tacacs+
index <1-2>
Configures an entry of TACACS+ authorization server settings. C 13
address <ip-address> Sets the authorization server’s IP address. C 13
port <1-65535> Sets the authorization server’s port. C 13
secret <secret> Sets a secret password shared with the authorization server.
secret: 1~31 printable characters
C13
aaa server authorization tacacs+
mode <index-priority|round-robin>
Specifies how the IES decides which TACACS+ authorization server to
choose if you configure multiple servers.
index-priority: The IES tries to send authorization requests to the
first configured authorization server. If the authorization server does
not respond, then the IES tries to send requests to the second
authorization server.
round-robin: The IES alternates the sending of logs between the
configured authorization server settings.
C13
aaa server authorization tacacs+
timeout <timeout>
Specifies the amount of time (in seconds) that the IES can wait for a
request response from the TACACS+ authorization server.
In index-priority mode, the timeout is divided by the number of
servers you configure. For example, if you configure two servers and
the timeout is 30 seconds, then the IES waits 15 seconds for a
response from each server.
C13
no aaa server authorization tacacs+
index <index>
Clears the specified TACACS+ authorization server’s settings. C 13
no aaa server authorization tacacs+
mode
Resets the TACACS+ authorization mode to the default. C 13
no aaa server authorization tacacs+
timeout
Resets the TACACS+ timeout value to the default. C 13
show aaa server authorization
tacacs+
Displays all TACACS+ authorization server settings. E 3
aaa authentication enable <method>
[<method>...]
Sets the authentication methods to authenticate users’ access
privilege levels and sets the order. If the IES fails to get a request
response in time through the first method, the IES uses the second
method.
method: local or tacacs+
C13
aaa authentication login <method>
[<method> ...]
Sets the authentication methods to authenticate user login and the
order for using them.
method: local, radius or tacacs+
C13
show aaa authentication Displays the enable and login authentication method settings. E 3
no aaa authentication Resets both the enable and login authentication method settings to
their defaults.
C13
no aaa authentication enable Resets the enable authentication method settings to the default. C 13
no aaa authentication login Resets the login authentication method settings to the default. C 13
Table 69 aaa command summary (continued)
Command Description M P
To Next Page
Loading...
