Nebula Mobile Router User’s Guide
106
CHAPTER 7
Broadband
7.1 Broadband Overview
This chapter discusses the Zyxel Device’s Broadband screens. Use these screens to configure your Zyxel
Device for Internet access.
A WAN (Wide Area Network) connection is an outside connection to another network or the Internet. It
connects your private networks, such as a LAN (Local Area Network) and other networks, so that a
computer in one location can communicate with computers in other locations.
Figure 59 LAN and WAN
7.1.1 What You Can Do in this Chapter
• Use the Broadband screen to view a WAN interface. You can also configure the WAN settings on the
Zyxel Device for Internet access (Section 7.2 on page 108).
• Use the Ethernet WAN screen to convert LAN port number four as a WAN port or restore the Ethernet
WAN port to a LAN port (Section 7.3 on page 113).
• Use the Cellular WAN screen to configure a cellular WAN connection (Section 7.4 on page 114).
• Use the Cellular APN screen to configure the APN setting (Section 7.5 on page 115).
• Use the Cellular SIM screen to enter the PIN of your SIM card (Section 7.6 on page 120).
• Use the Cellular Dual SIM screen to configure your dual SIM cards settings and cellular backup
(Section 7.7 on page 122).
• Use the Cellular Band screen to view or edit a cellular WAN interface. You can also configure the
WAN settings on the Zyxel Device for Internet access (Section 7.8 on page 123).
• Use the Cellular PLMN screen to display available Public Land Mobile Networks (Section 7.9 on page
124).
• Use the Cellular IP Passthrough screen to configure a cellular WAN connection (Section 7.10 on page
126).
To Next Page
Loading...
