Chapter 2 Hardware Panels
Nebula Mobile Router User’s Guide
29
2.2.4 Nebula NR7101
Figure 9 Nebula NR7101 LED
The following are the LED descriptions for your Nebula NR7101.
Cellular Signal
Strength
Green On The signal strength is excellent.
Orange On The signal strength is fair.
Red On The signal strength is poor.
Blinking There is no cellular signal, or signal strength is below the poor
level.
WiFi/WPS Green On WiFi is enabled.
Blinking
(fast)
Data is being transmitted and received.
Blinking
(slow)
WPS is activated, and the Zyxel Device is establishing a WPS
connection.
Table 5 Nebula NR5101 LED Behavior (continued)
LED COLOR STATUS DESCRIPTION
Table 6 Nebula NR7101 LED Behavior
COLOR STATUS DESCRIPTION
Green On The Zyxel Device is connected to the Internet.
Blinking The Zyxel Device is trying to connect to the Internet.
Amber On The WiFi is activated. The Zyxel Device is connected to the Internet.
Blinking The WiFi is activated. The Zyxel Device is not connected to the Internet.
Red On The Zyxel Device is not connected to the Internet.
Blinking The Zyxel Device is booting or self-testing.
Off There is a system failure.
Green/Amber/Red Looping Firmware upgrade is in process.
To Next Page
Loading...
