Chapter 34 Firmware Upgrade
Nebula Mobile Router User’s Guide
298
Figure 195 Error Message
34.3 Module Upgrade
This screen lets you upload new firmware specific to the built-in LTE module in order to improve the LTE
module’s reliability and performance. The upload process uses HTTP (Hypertext Transfer Protocol) and
may take more than 3 minutes. After a successful upload, the Zyxel Device will reboot.
Click Maintenance > Firmware Upgrade > Module Upgrade to open the following screen.
Figure 196 Maintenance > Firmware Upgrade > Module Upgrade
The following table describes the labels in this screen.
Table 132 Maintenance > Firmware Upgrade > Module Upgrade
LABEL DESCRIPTION
Upgrade Cellular Module Firmware
Current
Module
Version
This is the current module firmware version.
Choose file... Enter the location of the file you want to upload in this field or click Choose File/Browse to find
it.
Choose File/
Browse
Click this to find the .bin file you want to upload. Remember that you must decompress
compressed (.zip) files before you can upload them.
Upload Click this to begin the upload process. This process may take more than 3 minutes.
To Next Page
Loading...
