ZyXEL Communications Nebula LTE3301-PLUS - Setting up a Guest Network

Chapter 5 Web Interface Tutorials
Nebula Mobile Router User’s Guide
63
4 Within 2 minutes, enable WPS on the WiFi device.
The Zyxel Device authenticates the WiFi device using the PIN, and then sends the WiFi network settings to
the device using WPS. This process may take up to 2 minutes. The WiFi device is then able to connect to
the WiFi network securely.
5.3.3 Setting Up a Guest Network
A company wants to create two WiFi networks for different groups of users as shown in the following
figure. Each WiFi network has its own SSID and security mode. Both networks are accessible on both 2.4G
and 5G WiFi bands.