Chapter 29 Remote Management
Nebula Mobile Router User’s Guide
282
29.7 Add Trust Domain
Use this screen to add a public IP address or a complete domain name of a device which is allowed to
access the Zyxel Device.
Click the Add Trust Domain button in the Maintenance > Remote Management
> Trust Domain for IP Passthrough screen to open the following screen.
Figure 186 Maintenance > Remote Management > Trust Domain for IP Passthrough > Add Trust Domain
The following table describes the fields in this screen.
Table 125 Maintenance > Remote Management > Trust Domain for IP Passthrough > Add Trust Domain
LABEL DESCRIPTION
IP Address Enter a public IPv4/IPv6 IP address which is allowed to access the service on the Zyxel
Device from the WAN.
Cancel Click Cancel to restore your previously saved settings.
OK Click OK to save your changes back to the Zyxel Device.
To Next Page
Loading...
