Chapter 8 Wireless
Nebula Mobile Router User’s Guide
148
8.8 WLAN Scheduler
Use the WLAN Scheduler screen to create rules to schedule the times to permit Internet traffic from each
wireless network interfaces. Select a specific time and day of a week for scheduling. You can also
create a rule to automatically switch off all the WLAN together.
Click Network Setting > Wireless > WLAN Scheduler.
Figure 88 Network Setting > Wireless > WLAN Scheduler
The following table describes the labels in this screen.
Table 53 Network Setting > Wireless > WLAN Scheduler
LABEL DESCRIPTION
WLAN Scheduler
Access
Click this switch to enable the WLAN scheduler function. This serves as the main switch to
allow the individual rules to function. When the switch turns blue , the function is enabled.
Otherwise, it is not.
Add New Rule Click this to configure a new WLAN scheduler rule.
# This is the index number of the entry.
Active Click the check box to enable individual rules.
Note: Make sure to enable the WLAN Scheduler Access switch for the individual
rules to work.
Rule Name This field displays the name of the rule.
SSID This is the descriptive name used to identify the wireless network interface that this rule applies
to. Will show ALL WLAN if you select All wireless networks in the Add New Rule screen.
Day This field displays the days of the week that you wish to apply this rule.
Time This field displays the time of the day that you wish to apply this rule.
Description This field shows a description of the rule, usually to help identify it.
Modify Click the Edit icon to configure the rule.
Click the Delete icon to remove the rule.
To Next Page
Loading...
