Chapter 12 DNS
Nebula Mobile Router User’s Guide
209
The following table describes the labels in this screen.
12.3 Dynamic DNS
Dynamic DNS can update your current dynamic IP address mapping to a hostname. Configure a DDNS
service provider on your Zyxel Device. Click Network Setting > DNS > Dynamic DNS. The screen appears
as shown.
Figure 136 Network Setting > DNS > Dynamic DNS
The following table describes the fields in this screen.
Table 80 Network Setting > DNS > DNS Entry: Add or Edit
LABEL DESCRIPTION
Host Name Enter the host name of the DNS entry.
IPv4 Address Enter the IPv4 address of the DNS entry.
Cancel Click Cancel to exit this screen without saving.
OK Click OK to save your changes.
Table 81 Network Setting > DNS > Dynamic DNS
LABEL DESCRIPTION
Dynamic DNS Setup
Dynamic DNS Select Enable to use dynamic DNS.
Service Provider Select your Dynamic DNS service provider from the drop-down list box.
Host Name Enter the domain name assigned to your Zyxel Device by your Dynamic DNS provider.
You can specify up to two host names in the field separated by a comma (",").
To Next Page
Loading...
